INCH-POUND
MIL-PRF-53015B
7 October 2011
SUPERSEDING
MIL-PRF-53015A
01 February 1999
PERFORMANCE SPECIFICATION
DISPLACEMENT AND EVACUATION KIT, COLLAPSIBLE HOSELINE
This specification is approved for use by all Departments and Agencies of the
Department of Defense.
1. SCOPE
1.1 Scope. This specification covers a displacement and evacuation kit containing items
necessary to remove liquid and air from sections of 6-inch or 4-inch collapsible hoseline.
1.2 Classification. The collapsible hoseline displacement and evacuation kits will
conform to the following types and styles (see 6.2).
1.2.1 Types. The types of displacement and evacuation kits are as follows:
Type I -
Displacement and evacuation kit for 6-inch collapsible hoseline.
Type II -
Displacement and evacuation kit for 4-inch collapsible hoseline.
1.2.2 Styles. The styles of displacement and evacuation kits are as follows:
Style A -
Double groove and cam-locking end connections.
Style B -
Cam-locking end connections only.
Style C -
Double groove, cam-locking, and MIL-C-24356 end connections.
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 4610
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business