MIL -PRF-53012A
AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM)
ASTM F 1145 Standard Specification for Turnbuckles, Swaged, Welded, Forged
(Applications for copies should be addressed to the American Society for Testing and
Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.3 Order of precedence. In the event of a conflict between the text of this document and the
references cited herein, the text of this document takes precedence. Nothing in this document,
however, supersedes applicable laws and regulations unless a specific exemption has been
obtained.
3. REQUIREMENTS
3.1 Description. The hoseline suspension kit (hereinafter called kit) shall be used to raise
collapsible hoseline at road crossings, small streams, and other areas where nestable culverts or
road guards may not be used. The kit components shall provide enough material for one 200-foot
crossing and shall be contained in a storage chest for ease in handling and transport.
3.2 First article. When specified (see 6.2), a kit shall be subjected to first article inspection in
accordance with 4.2.
3.3 Physical characteristics.
3.3.1 Kit components. The kit shall consist of the components specified in table I.
TABLE I. Collapsible hoseline suspension kit components
Item
Component
Ref. para.
Qty. type I kit
Qty. type II kit
1
Wire rope
3.4.1
350 feet
350 feet
2
Fibrous rope
3.4.2
300 feet
300 feet
3
Wire rope clip
3.4.3
25
25
4
Shackle
3.4.4
60
60
5
Hose saddle
3.4.5
60
60
14·
6
Anchor
3.4.6
14·
7
Block
3.4.7
4
4
8
Turnbuckle
3.4.8
4
4
9
Wire rope thimble
3.4.9
4
4
10
Hoist
3.4.10
1
Not required
11
Chest
3.5.1
1
1
· Reducible (see 6.4)
3.4 Performance characteristics.
3.4.1 Wire rope. The wire rope for a type I or type II kit shall be uncoated, 6 by 19 regular lay
with fiber core. The wire rope shall be one continuous length, spool mounted. A design factor of
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business